not so much higher pressure but higher flow/duty cycle, but in effect the same thing.Sounds like a right arse of a job, why not just buy an XSi :...
Pendulumfigure that one out :p
Quite an easy job, just remove the hub carrier and take it to a friendly garage and get them to press out the old one and fit a new bearing (£18.50 f...
depends wether they just mashed at it with a sledge or cut and re-welded it, but as long as its neat and tidy and nopt a sign of rust itll be okI ...
if its a wheelbearing it would give top and bottom play, steering rack would be evident from the steering wheel, see how much slack there is before th...
get the tracking checked, its possible that the lower arm is bent if it took a fair impact.as for the rumble I cant think what it could be if its ...
1 Nope2 Possibly, wait for someone a bit more informed to reply.3 Maybe, but you cant have too much compression, increases torque 😀
1.5 is spot on, max is 3.0 for MOT purposes
sounds like you may have just blown a hose off the turbo
ask this bloke, or buy his car
No can do sorry, Its my birthday and Japfest at Castle Coombe with my mate Alun ( who has the same birthday but is a year older) and I have a chance ...
steering
well unless you have a trailer you havent got any way of getting the car to a garage as you've taken the pipes off. Ask a pug specialist or go to a d...
if its the same as a 5 speeder youll need 2 litres, although you never get 2 litres to drain out of it unless you strip them.on the l/h end of the...