what are the bushes you've had installed?The bearings come in a casing (so how does ther grease get in?) and the only non removable contact surfac...
😆 the dervs never had 4 speed :pany 5 speed box will fit, just make sure you get the one that suits your engine best.
they are slightly different, the disc offset is different on a 406.To fit them you need to use gti6 discs and grind a small amount of the carrier ...
wont have time?? 50 miles wont take long....
i think they're not compatible, the part numbers in Demon tweeks's catalouge are different.Best bet is to try fitting it!
its probably due to the rack, as space is relatively tight there, best bet would be to replace the manifold and keep the o.e downpipe as the whole set...
😮 last time i had a lambda sensor changed it cost me £90 all in!hope you get it sorted, if you dont get it back tommorow try and get a loan ...
:confused:
:topic: 😆Cant be that difficult a conversion to do as there are similar engines used in the 406, so it might just be a case of jussling aro...
if it doesnt plug into your loom you dont need it
its also been done in a 205 by a dutch friend of a member, it wont fit a rhd one though due to the master cylinder being in the way but it would fit a...
but if it doesnt plug into your existing setup and you actually do need a cat just remove it and plug the hole with a suitably sized bolt.
erm, another lambda?
lol, though with an 8v bottom end wont it have a 9.6-1 compression ratio rather that the 10.4 that the 16v has?cant see why peeps are worried thou...