www.longlife.co.uk they have just recently had a flashy new website 😀a downpipe back system for my 205 cost me £289 and they quoted me £299 ...
if you checkout toolsbypost.com they should be able to do you a balancer for a very reosanable price. 0870 443 0290 I have a copy of car mechanics m...
glassfibre
i think so! have you got a re-angled manifold? maybe you need to slide the downpipe forwards a little, but you can only do that if its a sleeve joint ...
as in sat on the mounts correctly, are the bolts done up and is the r/h one in the middle between the buffers?
loosen the downpipe to centre box clamp and move it into the middle of the tunnel, and make sure the engine is in the right place.
yup, best to take em out totally and measure the depth too as that can vary quite a bit too.
i preffer the planted feel of the 306, i always felt too high up in the 206 i had a lift in and they look too tall 🙁a 6 can also match the perf...
Yep, the one thing you have to remember is wherever you park illegally the police or anyone else CANNOT damage the car in any way, this obviously incl...
yep, mine passed its MOT with a seized beam and no camber on the wheels, both sets of bearings were non existent and due to the tension of the torsion...
map sensor? they can gunk up, and seeing as the idle valve was cruddy its quite likely to be dirty too.
they will fit but wont lower it 40mm, and will also be too hard for it due to the lack of weight in the ikle engine
well the days of the 182 are numbered too, 197 is on the way :doh:
sounds like a pressure regulator. basically a ball bearing valve to reduce rear end lockup under heavy braking, if you have a leak STOP driving right...
Nah you're all wrong, white is the best colour :whistle:weird that mine is rusting on the front inner wings but hasnt had a bump and was built i...