new one? peugeot obviously!any XU pulley thats the same dimensions will do the job (i.e will be the same part) so one off any non power steered XU...
must have been one helluva badger!
unless it has a/c dont bother with the leather! cat on a hot tin roof springs to mind last time i sat in a non a/c leathered up car! and vice versa iu...
Mi16 alloys, condition and piccies? any tyres?cheers :beer:
yup, and if you bother to do so you might as well go the whole hog and rebuild it!
quote KRISKARRERA:Yeah but I thought that's how it had to be done anyway because how can you move the trailing arm to another position if it's still c...
BUT!simply removing the torsion bar an rotating it will not alter the ride height, you need to adjust the static position of the trailing arm befo...
right then!loosen wheelbolts, jack up rear of car and remove both wheels, support car on axle stands.remove shock absorbers.remove torsi...
good work fella, best get a cold air feed though!
and you might want to make sure your steering wheel is secured properly too :p
yay! :clap: not sure but shouldnt it be at 1.5% or is that just the 8v engine?was it just that ?
have you fitted the clutch cable?
yes indeedy, saved roughly £11 😀
with the compexity of modern management systems it'll be producing extra power without needing adjustment to any mapping anyway as the systems can tel...