quote S1 PSO:To make sure i'd measure the hub to arch distance when raisingthe arms. Different Peugeots have different trailing arm/damper movement ra...
Tim, what are you after? I have a spare set of 60mm studs & 60' taper seat nuts for aftermarket alloys I'll sell for what they cost.Graham.
quote yogibear47.lee:so how u lower the rear Easy, remove the shocks & free both ends of the torsion bars independently & set the distance...
They list the sizes specifically for Peugeots.I did a couple of group buys from them last year over on 205drivers (propbably the ones you saw Alex...
quote the_mighty_one:So you would have to press the pistons off the conrods, which in my experience is damned hard work.tried to do this last engi...
quote fugm:it could be the rear axle front rubber bushes gone.had them go on ma 309 and you wont find play in them much when there on there car. Whi...
The coolant pipe from the little outlet on the thermostat housing goes either to the throttle body or back to the expansion tank iirc.(its not needed ...
If any bump in the road makes the back end crash & the whole car feels nervous I'd get the rear beam checked asap.You can do this easily by op...
quote d halliwell:Graham have you a picture of your bushes and position of the Grease nipples. I've got a picture somewhere but couldn't find it yest...
I have grease nipples fitted to my rear beam tube as I have done away with the outer bearings. I got them from my local motor factors iirc.I'm no...
quote fugm:I would say your better of using a normal bearing with grease nipples in.prob cheaper to a complete axle bearing set is only 38.90 inc vat ...
quote Kris_s:is it ok to pull the trailing arms from the rear axle, im dong it to hammer out my torsion bars but will removing them damage the bearing...
I've relaced the outer bearings on my 309 beam with phosphur bronse bushes with grease channels & a grease nipple, that'll definately never wear o...
Sean,Didn't Dave like the catcam of a similar spec to the PT28?How loud is the group A exhaust & is it stainless?Graham.
Shows a 16v engine but the order is the same. 😀Graham.